High-Performance Composite Filaments

Fiberonโ„ข PA6-GF25

Superior thermal and mechanical performance while maintaining excellent printability

Shop now
HDT(ยฐC)
0.45Mpa191
Young's
Modulus
Dry5356 MPa
Young's
Modulus
Wet1793 MPa
Spool info:
1.75mm
500g, 2kg

About PA6-GF25

TDSSDS

Fiberonโ„ข PA6-GF25 is a glass fiber reinforced Nylon 6 filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion or printability. Fiberonโ„ข PA6-GF25 is strong, durable and features a heat deflection temperature of 191ยฐC. It can be used in applications where stiffness and durability are paramount.

Application Category

Consumer Productsโ€‹
Electronics
Industrial parts
Heat deflection temperature (0.45Mpa)
HDT(ยฐC)191
Young's modulus
Dry5356 MPa
Wet1793 MPa
Tensile strength
dry (x-y)
80.1 MPa
dry (z)
60.7 MPa
wet (x-y)
40.2 Mpa
wet (z)
26.3 MPa
Charpy Impact strength
notched
dry
10.0 kJ/mยฒ
wet
28.0 kJ/mยฒ
Bending modulus
dry (x-y)
4314.2 MPa
wet (x-y)
1448.1 Mpa
(*) all data are from printed specimen
High heat resistance
Dimensionally stable during printing

Download a printer profile

Printer compatibility

Printing temperature:
300ยฐC
Bed temperature:
50ยฐC

(*) No heated chamber or enclosure needed

Nozzle compatibility

Brass nozzle has a lifespan of 9h when printing PA6-GF25. We recommend to use a more durable nozzle.
PA6-GF25
The best thing on the marker for your next awesome project
Shop now

Get inspired by our featured case studies

Our goal is to make materials with a key characteristic - advanced materials that are easy to use for anyone, coming from any industry, without the need of an advanced technological skill set.
June 12, 2024
Recreating Conditions at the Centre of Planets
Read More
September 10, 2023
Polymaker & Amesos: Water Pump Mounting Plates for Agricultural Drones
Read More
Not sure?
Chat with a specialist
Contact us now
Check material comparison guide
  • Why should we not exceed 50ยฐC on the bed temperature? Isn't this too low for all other carbon nylon filaments?

    Our revolutionary Warp-Free technology has been developed to overcome the barriers of printing difficulties and enhance dimensional stability for Nylon based products. With this innovative solution, our nylon products can be printed at lower bed temperatures without experiencing warpage issues. To maintain the integrity of the Warp-Free technology and prevent warpage, it is advised not to exceed a temperature of 50ยฐรŠ when using Fiberonโ„ข PA6-GF25. Higher temperatures can invalidate the Warp-Free technology and accelerate the crystallization speed of polyamide polymers, resulting in potential warping issues. In comparison to competitive products, our filaments exhibit superior dimensional stability, providing an exceptional printing experience.

  • What is the percentage of the glass fiber content in Fiberonโ„ข PA6-GF25?

    It contains 25 wt% carbon fibers.

  • Do PA6-GF25 prints need annealing? What are the annealing conditions?

    We strongly recommend 100ยฐC, 10h annealing to achieve the best performance of the material.